Topics 2007-2015

Article Index

2007-2015年


Our company also is participating in the JIS recognition of friction welding for dissimilar material

October, 2013

Our product was recorded under the heading of "Standardization of joining of dissimilar metallic material, The Ministry of Economy, Trade and Industry, The processing method of the friction use develops the global market." that had been published in Nikkan Kogyo News paper (October 18, 2013). Our company also is participating in the JIS recognition of friction welding for dissimilar material.

» Reference page: The Nikkan Kogyo News paper

» Reference page: Article on Nikkan Kogyo News paper correspondence


Friction welding of the small diameter and thin wall pipes

2013

Friction welding of the small diameter pipes

We are able to friction weld small diameter pipes as thin as 4mm.

Extension friction welding of φ4 tool

Friction welding of the thin wall pipes

Friction welding of the thin wall pipes

Flange friction welding of  φ10×0.9t stainless pipe

For more information, contuct us:


Friction Welding Division has been relocated since August 2013

August, 2013

New address
Hirabayashi Kita 1-2-49, Suminoe Ward, Osaka City, Osaka 559-0026 Japan
New telephone number
TEL: + 81 - 6 - 6683 - 0680
FAX: + 81 - 6 - 6683 - 0681c

Our quality assurance is enhanced further.

July, 2013

We passed the (MT) magnetic particle testing level 2 that general incorporated association Japanese Society for Non-Destructive Inspection recognized.

Our company has the performance qualification of the following non-destructive examinations now.

  • (PT) Penetration inspection; Level 2
  • (MT)Magnetic particle inspection; Level 2
  • (UT) Ultrasonic inspection; Level 2

» Reference page: The Japanese Society for Non-Destructive Inspection


New and powerful friction welding machine FF-45 operated from

October, 2010

friction welding machine FF-45
Spec of compound machine FF-45
Name Servo control horizontal friction welding machine
Manufacture Nitto Seiki Co., Ltd
Model FF-45 II C50S-SK
Thrust 25~215 kN (2.55~22 ton)
Characteristic
  • The phase match is possible due to the servo motored main axis ( The joint angle can be adjusted by 0.2° pitch. )
  • The electric pressurizing method with the servo motor and the ball screw (It used to be an oil pressure method)
Pressurizing servo for FF-4
Pressurizing servo for FF-4
Main axis FF-45
Main axis FF-45

Joining angle is controlable.

ff-45
ff-45

We participated in the third research meeting of the Japan Friction Joining Association

October, 2008

The third research meeting of the Japan Friction Joining Association was finished satisfactory.

We presented on the subject of "Trouble case and countermeasures of friction welding of CrMo steel".

Date

February 15 (Fri), 2008,  13:30〜16:50

Place

Technology Research Institute of Osaka Prefecture No.1 meeting room (2F)

http://tri-osaka.jp/
Ayumino 2-7-1, Izumi city, Osaka Prefecture
TEL:0725-53-1121

The main program

Development of accumulating forming method that uses friction stir welding

Small scale friction welding of TiNi alloy

Trouble case and countermeasures of friction welding of CrMo steel (Our presentation)

Practical use development of friction stir welding technology by small and medium enterprises

Reference page: Japan Friction Joining Association



The FF-80 type friction welding machine was newly introduced.

July, 2007


We were certificated by ISO9001.

June, 2007

We acquired ISO9001 that is the quality management system standard.

IGNet registration date:
June 1, 2007
IGNet registration number:
JP-JQA-QMA13267
ISOMS

The building of the aluminum truss structure was built in front of Tohbu Tohjou Line Asaka Station.

May, 2007

Construction place:
Station square of Asaka Station south exit, Tohbu Tohjou Line
Product name:
Aluminum alloy system truss
Friction welding:
Strut (A6061) and end plug (A6061)
Manufacturing number:
1296, (φ80:1984 φ60:608)
Aluminum alloy system truss Aluminum alloy system truss

Page Top